Membership Knowledge Base

From ATXHackerspace

Revision as of 15:15, 8 April 2019 by Ttrout (talk | contribs) (Software)

Jump to: navigation, search

Volunteer your skills/knowledge here


Report all problems to

Consistency tests needed.

FAQ 'Insufficient flow from air:' turn on air.

Danny's CNC router

Report all problems to


Z jitter: That can happen when it jams due to debris in the ways or the leadscrew. Clean the ways, wheels, and leadscrew. It's one thing that can cause stalling. There are other possible causes Leadnut was worn out- but it's been replaced: mar 20, 2019

Z jitter tests: The leadscrew and ways were reasonably clean and the leadscrew had some lube. I cleaned the ways, wheels, and cleaned off the old lube on the leadscrew and re-lubed.

Sparktech eBay name is drillman1, carbide plus store


Antonio lathe/bowls, machine maintenance



Manual Mills Joe Lathe Jay Tormach Mill Eric, Max



  • Arduino projects and interfacing - Riley
  • PCB Design and Manufacturing - Martin Antonio


Eric aluminum Matthew Goodman


  • Python: Gunnar like to hold classes regularly on data science & robotics topics
  • CAD Drafting and 3D modeling Eric
  • Openscad Rob
  • Arduino Bion, Ryan, Marshall Vaughan
  • Beagle Ryan, Jerry
  • FPGA/steppers Danny
  • Servos Jerry
  • SQL Crothers
  • GL/gaming Steve Baker
  • Web Steve Baker

Hackerspace Usability Initiative