From ATXHackerspace
ATX HackerSpace Pages relating to Projects |
Projects |
Wishlist of Needed Actions |
Taig Mini-Mill |
Injection Molding Machine |
Edit this template |
Material list:
2 pcs 3/16" x 2-1/2" x 2-1/2" HRS angle, 12" long
1pc 1/8" x 1-1/2" x 1-1/2" HRS angle, 25-1/2" long
1pc 1/8" x 1-1/2" x 1-1/2" HRS angle, 24" long
2 pcs 1/4" x 1-1/2" x 6-1/4" HRS flat bar
1pc 1/4 x 1-1/2 HRS flat bar 8-3/4 long
1pc 3/16 x 2-1/2 x 2-1/2 HRS angle 9-5/8 long
1pc 1/4 x 1-1/2 HRS flat bar 19" long
2pcs 1/4 x 3/4 HRS flat bar 4-1/2 long
2pcs 1/4 CRS round rod, 1" long
1pc 1/2 CRS round rod, 3" long
1pc 1/2 CRS round rod, 7" long
1pc 3/8-16 threaded rod, 4-1/2 long
1pc 1/4 x 3 CRS bar stock 4" long
1pc 3/8-16 nut
1pc 1 x 1-1/2 CRS bar stock 4" long
1pc 1 x 1-1/2 CRS bar stock, 1" long
1pc 1/2" CRS round rod, 1" long
1 100-500 degree oven thermometer
1 250 Watt cartridge heater, 3/8 diameter, 3" long
1 250 to 600 degree adjustable thermostat
1 pc 3/8 CRS round rod, 1-3/4" long
1 5A/120V toggle switch
1 120V indicator light
2ft of 14 gauge, 450 degree centigrade appliance wire
1 6' long, 18 gauge 120V power cord with ground.
2 18-12 porcelain wire nuts
1pc of 1-1/2 x 3-1/8 20 gauge sheet metal
1pc of 3-3/8 x 7 20 gauge sheet metal
1pc of 2-3/4 x 10 20 gauge sheet metal
1pc of 3 x 10-1/2 20 gause sheet metal
screws, nuts, etc.