Volunteer your skills/knowledge here

Red

Report all problems to dannym@austin.rr.com

Consistency tests needed.

FAQ 'Insufficient flow from air:' turn on air.

I have a project that has alignment marks on them and wondering if there is a way on the Red laser to move the laser head manually either by the arrows or coordinates so I can check my overlay?

Danny's CNC router

Report all problems to dannym@austin.rr.com

FAQ

Z jitter: That can happen when it jams due to debris in the ways or the leadscrew. Clean the ways, wheels, and leadscrew. It's one thing that can cause stalling. There are other possible causes Leadnut was worn out- but it's been replaced: mar 20, 2019

Z jitter tests: The leadscrew and ways were reasonably clean and the leadscrew had some lube. I cleaned the ways, wheels, and cleaned off the old lube on the leadscrew and re-lubed.

Sparktech eBay name is drillman1, carbide plus store

Wood

Antonio lathe/bowls, machine maintenance

Metal

Joe josephqtn1@gmail.com

Manual Mills Joe Lathe Jay Tormach Mill Eric, Max

Art

• 28mm miniature kitbashing & painting - Marshall Vaughan

Electronics

• Arduino projects and interfacing - Riley
• PCB Design and Manufacturing - Martin Antonio

Casting

Eric aluminum Matthew Goodman

Software

• Python: Gunnar like to hold classes regularly on data science & robotics topics
• CAD Drafting and 3D modeling Eric
• Openscad Rob
• Arduino Bion, Ryan, Marshall Vaughan
• Beagle Ryan, Jerry
• FPGA/steppers Danny
• Servos Jerry
• SQL Crothers
• GL/gaming Steve Baker
• Web Steve Baker

Hackerspace Usability Initiative

• Tool Sheets - Objective: Display key information relative to the tools in the space in a clear and visible way.
• Space Improvement Ideas and Brainstorm - Open category for anyone to pitch how the hackerspace can be a better place tomorrow.